中文  English
服务热线:0086-0510-83269982
位置:主页 > English > NEWS >

YB2 series flameproof type three - phase asynchronous motor

作者:admin时间:2019-03-28 13:23浏览:

  YB2 series flameproof three-phase asynchronous motor is developed according to the market demand. It is an ideal driving product to meet the need of high-power equipment in the environment of explosive gas in factories, coal mines and other places. It has the characteristics of high efficiency, low noise, long life and high reliability.

  Series YB2 flameproof three-phase asynchronous motor performance accord with GB3836.2-2010 "explosive gas environment with electrical equipment part 2: flameproof" d ", "and the international electrotechnical commission standards IEC79-1 respectively made flameproof Exdl, ExdllAT4, neither ExdllBT4 is suitable for the coal mine digging face and factories have type IIA and IIB level temperature classes T1 - T4 groups exist for the dangerous sites with explosive air mixture.

  So what are the key points of YB2 series explosion-proof motors?

  1. As YB2 series explosion-proof motors are flameproof motors, explosive mixtures inside things are required to explode, and the flameproof shell shall not be damaged or deformed to affect the flameproof performance; The internal explosion flame is not allowed to cause the explosion of the external explosive mixture through the flameproof bonding surface of the shell, therefore:

  A. The parts that make up the flameproof shell, such as the stand, end cover, bearing inner cover, junction box cover, junction box base, etc., shall pass 1.0mpa after finishing and pass 10S static pressure test;

  B. Length gap, surface roughness, electrical clearance and creepage distance between exposed conductors inside junction box and between exposed conductors and metal shell are shown in figure 1 and 2 below.

  C. The bolts of the successive flameproof housing are equipped with spring washers to prevent them from loosening themselves.

  D. The stand, end cover, bearing inner cover, junction box seat, junction box cover, connection bolt, terminal sleeve (or junction plate), shaft and sealing ring are flameproof parts. The sealing ring is made of rubber xh-21. The structure is shown in figure 3 below.

  Second, under the rated working condition, motor shell surface temperature, coal mine use shall not exceed + 200 ℃, but there are coal accumulation in the external surface of the motor, shall not exceed + 150 ℃. The temperature outside the inlet port shall not be higher than the allowable temperature of the cable used to ensure the reliable operation of the cable.

Tel:0086-0510-83269982
Fax:0086-0510-83269953
Email:mail@wxlhdj.com
Address:4#,Tianshi road Shitangwan town,Wuxi city